Fiberglass Composite Mat NMS335 of Nanjing Tianming:
Basic Parameters:
Qualified by the Third-part Test:
• The odour characteristics - RA
• VOC - SGS
• Asbestos-free - SGS
• RoHs - SGS
• SOC - Shimadzu
etc.
Uses:
• Automotive parts
• Boats/yachts
• Building components
• Chemical corrosion resistant pipes
• Cooling towers
• Tanks
etc.
Or please tell me the application of your fiberglass chopped strand mat. Then the one most suitable for you will be recommended.
Packaging:
Loading Quantity:
One plastic bag and carton for a roll with N.W.30kg. 12 or 16 rolls on a pallet. 20 pallets (10 pallets with 12 rolls, 10 pallets with 16 rolls) in one 20' container, that is N.W. 8.4t in one 20' container.
Storage:
Unless otherwise specified, fiberglass products should be stored in a dry, cool and moistureproof area. Room temperature and humidity should always be maintained at 15°C - 35°C, 35% - 65% respectively. Best used within 12 months after production date. Fiberglass products should remain in their original packaging until just prior to use.
Fiberglass Composite Mat Series:
Any question, please contact me:
Fiberglass Composite Mat (Continuous Filament Mat and Polyester Surface Mat) for Boat Floor
Fiberglass Composite Mat (Continuous Filament Mat and Polyester Surface Mat) for Boat Floor
Fiberglass Composite Mat (Continuous Filament Mat and Polyester Surface Mat) for Boat Floor
Basic Parameters:
| Model No.: | NMS335 |
| Weight: | 1.1oz. per sq/ft or 335grams per sq/m |
| Width: | up to 102.36" or up to 2600mm |
| Net Weight per roll: | 66lbs±1.1lbs or 30kg±0.5kg |
| Size of the Inner Carton Tube: | Length 51" * Diameter 3" * Thickness 0.2" or Length 1300mm * Diameter 76mm * Thickness 5mm |
Qualified by the Third-part Test:
• The odour characteristics - RA
• VOC - SGS
• Asbestos-free - SGS
• RoHs - SGS
• SOC - Shimadzu
etc.
Uses:
• Automotive parts
• Boats/yachts
• Building components
• Chemical corrosion resistant pipes
• Cooling towers
• Tanks
etc.
Or please tell me the application of your fiberglass chopped strand mat. Then the one most suitable for you will be recommended.
Packaging:
Loading Quantity:
One plastic bag and carton for a roll with N.W.30kg. 12 or 16 rolls on a pallet. 20 pallets (10 pallets with 12 rolls, 10 pallets with 16 rolls) in one 20' container, that is N.W. 8.4t in one 20' container.
Storage:
Unless otherwise specified, fiberglass products should be stored in a dry, cool and moistureproof area. Room temperature and humidity should always be maintained at 15°C - 35°C, 35% - 65% respectively. Best used within 12 months after production date. Fiberglass products should remain in their original packaging until just prior to use.
Fiberglass Composite Mat Series:
| Model No. | Weight | Width | Loss on Ignition | Moistrure | Net Weight per Roll | Use And Craftwork | |||
| (oz. per sq/ft) | (grams per sq/m) | (inch) | (mm) | (%) | (%) | (lb) | (kg) | ||
| EMSC-P | 0.98/1.47/2 | 300/450/600 | 47-94.5 | 1200-2400 | 2-8 | ≤0.2 | 66 | 30 | Pultrusion / Winding |
| EMSC-R | 0.98/1.47/2 | 300/450/600 | 47-94.5 | 1200-2400 | 2-6 | ≤0.2 | 66 | 30 | Injection |
| EMSC-M | 0.98/1.47/2 | 300/450/600 | 47-94.5 | 1200-2400 | 2-8 | ≤0.2 | 66 | 30 | Molding & Hand Lay-up |
| EMSP | 0.79 | 240 | 41-94.49 | 1040-2400 | 2-8 | ≤0.2 | 77 | 35 | Pultrusion / Compression Molding |
| EMSP | 1.10 | 335 | 41-94.49 | 1040-2400 | 2-8 | ≤0.2 | 77 | 35 | Pultrusion / Compression Molding |
| EMSP | 1.60 | 485 | 41-94.49 | 1040-2400 | 2-8 | ≤0.2 | 77 | 35 | Pultrusion / Compression Molding |
Any question, please contact me:
Fiberglass Composite Mat (Continuous Filament Mat and Polyester Surface Mat) for Boat Floor
Fiberglass Composite Mat (Continuous Filament Mat and Polyester Surface Mat) for Boat Floor
Fiberglass Composite Mat (Continuous Filament Mat and Polyester Surface Mat) for Boat Floor